AUTOMOTIVE PARTS (5:1)

Soak in a container filled with solution. Wipe or brush clean.

AUTO INTERIORS (5:1)

Note: for Leather Interiors see section on LEATHER. Spray solution on all surfaces first to allow grime to begin breaking down while you work. Use a small brush or toothbrush to get into crevices. Wipe each surface with damp towel or cloth (spray with distilled or other purified water for greater cleaning power). Scrub where necessary. Follow with dry cloth. For fabric upholstery, use an aerating foamer pump dispenser with a lighter solution (10:1). Brush clean in a circular motion. Lift stains by spot cleaning and pressing with clean cloth, alternating damp cloth with dry cloth.

AUTO EXTERIOR (5:1)

Work on a cool surface in shade. Remove bugs, bird droppings, tree sap and tar by spot spraying. Spray on, wait 30 seconds, and then wipe with damp cloth. Fill a age { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0in; font-style: italic } -->bucket with water and add 4-6 ounces of solution.

Use a sponge or rag to wash vehicle, or use a hose attachment containing solution to spray directly on vehicle. Use sponge to agitate. Rinse clean with hose. KD Gold™ run-off does not harm environment.

NOTE: KD Gold™ is an oil emulsifier that emulsifies wax. Always use a diluted solution, never concentrate, and rinse immediately and thoroughly with plenty of water to avoid stripping the wax finish off the painted surfaces of your car.

ASH TRAYS (5:1)

Empty excess ashes, spray with solution and rinse clean.